Search SPICO
SO3 Submerged Pump
| 
| 
| Submerged Pumps - Submerged Pumps 3" |
SO-3
Submerged Water Pump For Clean Water
|
|
Application:SPICO Submersible Drainage Pumps have been designed and manufactured to transfer water from shallow wells and to be used in agricultural, industrial and domestic purposes. Technical Characteristics:Submersible Drainage Pumps with 2" and 3" delivery sizes, with different heads and sufficient water delivery have been designed in 220V and 380V. At the time of turning on and turning off the pump some destructive strokes are conveyed to the pump and to the joined pipe, which after some time the pipe may be disconnected from pump. SPICO Co. has designed bronze screws on both sides of delivery head so that by tightening them the pipe won’t be released.
Parts: Pump casing, and the main components are made of the special cast iron of Ductile, high resistant to stroke and corrosion. Using shaft and screws of stainless steel which are high resistant to oxidation and corrosion. A rubber valve has been applied in these pumps in order to prevent the return of the water inside of the pump.
Impeller: The impeller is designed with bronze or stainless steel in option alloys which resist strongly against abrasion.
Paint: All cast iron parts are covered by a special paint of Epoxy (the paint used in coating Ships’ hulks) which creates a good resistance to oxidation.
Cable: Use of special cable of EPDM and CPE types to resist against salts soluble in water, moisture and acid or alkaline water.
Mechanical Seal: Using anti-abrasive seals (Silicon Carbide) with high quality to increase pump lifetime. To supply high quality and more reliable pumps and to increase the mechanical seals lifetime, SPICO has applied a special chamber full of oil between pump and electro motor which are sealed by using two mechanical seals and two oil seals which the oil can be controlled by an Allen screw no.8.
Porosity Impregnation: All casting parts have been alloyed by professional experts to avoid any pores or minute leaks in them. However, SPICO performs Porosity Impregnation process for main casting parts by using special machines and resin. So the electro motor penetrability to water reaches zero.
ID: All SPICO products have a serial no., engraved on pump casing, which is known as their identification no. This number specifies the production file and the technical ID of each pump which are kept in Company filing system.
Guarantee: All SPICO products, according to attached warranty terms, are guaranteed for SIX MONTHS upon purchase date. Using high protective systems for pumps are recommended.
|
| SO-3 Impeller | |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
