Search SPICO
I15-GD Sewage Pump
| 
| 
| Sewage Pumps - Sewage Pumps 3" |
I-15-GD
SEWAGE PUMP 3" FOR NORMAL SUMPS
|
|
Application:Pump 3 inch model I-15 is used for sewage engineering, transferring surplus contaminated waters of industries, buildings and refineries, to convey the chemical fertilizers, high contaminated waters, stone-cutting excess, waters containing sands of 25mm diameter, materials of fair roughness blocking the channels and also transferring the materials crushed in the liquids. Technical Characteristics:Sewage Pump I-15 3 inch model I with 2800 r.p.m and 220V or 380V has been designed to transfer normal sumps and high contaminated liquids containing abrasive substances and septic.
Parts: Pump casing, impeller and the main components are made of the special cast iron of Ductile, high resistant to stroke and corrosion. Using shaft and screws of stainless steel which are high resistant to oxidation and corrosion.
Impeller: Using Vortex impeller with high quality performance in transferring sewages mixed with suspended solids.
Paint: All cast iron parts are covered by a special paint of Epoxy (the paint used in coating Ships’ hulks) which creates a good resistance to oxidation.
Cable: Use of special cable of EPDM and CPE types to resist against salts soluble in water, moisture and acid or alkaline water.
Mechanical Seal: Using anti-abrasive seals (Silicon Carbide) with high quality to increase pump lifetime. To supply high quality and more reliable pumps and to increase the mechanical seals lifetime, SPICO has applied a special chamber full of oil between pump and electro motor which are sealed by using two mechanical seals and two oil seals which the oil can be controlled by an Allen screw no.8.
Porosity Impregnation: All casting parts have been alloyed by professional experts to avoid any pores or minute leaks in them. However, SPICO performs Porosity Impregnation process for main casting parts by using special machines and resin. So the electro motor penetrability to water reaches zero.
ID: All SPICO products have a serial no., engraved on pump casing, which is known as their identification no. This number specifies the production file and the technical ID of each pump which are kept in Company filing system.
Guarantee: All SPICO products, according to attached warranty terms, are guaranteed for SIX MONTHS upon purchase date. Using high protective systems for pumps are recommended.
|
| I-15-GD Impeller | |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
