P-12
|
|
Application:
Sewage Pump 2inch model P-12 with specific and unique Screw type impeller has been designed and manufactured for sewage engineering, evacuating water from buildings, industries, refineries, for transferring liquid chemical fertilizers, stone-cutting excess containing abrasive substances, high contaminated water containing abrasive substances, water containing sands with at most 15mm diameters, liquids containing materials of fair roughness blocking the channels and also transferring the materials crushed in water.
Technical characteristics:
Sewage Pump 2 inch model P-12 with 2800 r.p.m and 220V/380V, regarding the type of impeller has been designed to transfer concentrated liquids and sumps containing small and crushed solids or abrasives so as to power of 1.5KW.
Parts: Pump casing, impeller and the main components are made of the special cast iron of Ductile, high resistant to stroke and corrosion. Using shaft and screws of stainless steel which are high resistant to oxidation and corrosion.
Impeller: Using mix flow impeller for transferring sewages mixed with suspended solids.
Paint: All cast iron parts are covered by a special paint of Epoxy (the paint used in coating Ships’ hulks) which creates a good resistance to oxidation.
Cable: Use of special cable of EPDM and CPE types to resist against salts soluble in water, moisture and acid or alkaline water.
Mechanical Seal: Using anti-abrasive seals (Silicon Carbide) with high quality to increase pump lifetime. To supply high quality and more reliable pumps and to increase the mechanical seals lifetime, SPICO has applied a special chamber full of oil between pump and electro motor which are sealed by using two mechanical seals and two oil seals which the oil can be controlled by an Allen screw no.8.
Porosity Impregnation: All casting parts have been alloyed by professional experts to avoid any pores or minute leaks in them. However, SPICO performs Porosity Impregnation process for main casting parts by using special machines and resin. So the electro motor penetrability to water reaches zero.
ID: All SPICO products have a serial no., engraved on pump casing, which is known as their identification no. This number specifies the production file and the technical ID of each pump which are kept in Company filing system.
Guarantee: All SPICO products, according to attached warranty terms, are guaranteed for SIX MONTHS upon purchase date. Using high protective systems for pumps are recommended.
|
|
P12 Impeller |
|
|
Read more...
C-10
|
|
Application:
Sewage Pump model C with mixpool - flow impeller is used for sewage engineering, transferring surplus contaminated waters of industries, buildings, surplus floodwater to convey the wastes of textile industries and aviaries and the sumps containing filament and fiber.
Technical characteristics:
Sewage SPICO Pump model C with 2800 R.P.M and 220V or 380V has been designed to transfer dilute sumps containing round-shaped and fringed solids such as ash, hair, wool, paper, plastic & woolen particles.
Parts: Pump casing, impeller and the main components are made of the special cast iron of Ductile, high resistant to stroke and corrosion. Using shaft and screws of stainless steel which are high resistant to oxidation and corrosion.
Impeller: Using mixpool impeller for transferring sewages mixed with suspended solids.
Paint: All cast iron parts are covered by a special paint of Epoxy (the paint used in coating Ships’ hulks) which creates a good resistance to oxidation.
Cable: Use of special cable of EPDM and CPE types to resist against salts soluble in water, moisture and acid or alkaline water.
Mechanical Seal: Using anti-abrasive seals (Silicon Carbide) with high quality to increase pump lifetime. To supply high quality and more reliable pumps and to increase the mechanical seals lifetime, SPICO has applied a special chamber full of oil between pump and electro motor which are sealed by using two mechanical seals and two oil seals which the oil can be controlled by an Allen screw no.8.
Porosity Impregnation: All casting parts have been alloyed by professional experts to avoid any pores or minute leaks in them. However, SPICO performs Porosity Impregnation process for main casting parts by using special machines and resin. So the electro motor penetrability to water reaches zero.
ID: All SPICO products have a serial no., engraved on pump casing, which is known as their identification no. This number specifies the production file and the technical ID of each pump which are kept in Company filing system.
Guarantee: All SPICO products, according to attached warranty terms, are guaranteed for SIX MONTHS upon purchase date. Using high protective systems for pumps are recommended.
|
|
C10 Impeller |
|
|
Read more...
SI-25-3
FOR DIRTY WATER (CONTAINING ABRASIVE MATERIALS)
|
|
Application:
Agriculture, sewage engineering, transmission companies, municipalities, metro co., civil engineering, dam and road construction companies, excavation companies and for other domestic and industrial purposes.
Technical Characteristics:
SI-25-3 pump is in two models: three phase with 380V and single phases with 220 V has been designed and manufactured.
Parts: Cylinder block of Electromotor is made of special alloyed aluminum, the impeller, the cap and pump casing are made of Ductile cast iron, the shaft & all screws are made of stainless steel which multiply the resistance to corrosion.
Impeller: By using vortex impeller in this model, this pump can be used for transferring muddy waters containing sand and abrasive particles, surplus rain and flood water, stream and river water, to irrigate the farms and to evacuate the pits filled by waste water.
Paint: All cast iron parts are covered by a special paint of Epoxy(the paint used in coating Ships’ hulks) which creates a good resistance to oxidation. After final manufacturing and testing of all parts made of aluminum and before painting them, they are degreased in specific small pools and then acid dipping to get high resistance against the salts soluble in water.
Cable: Use of special cable of EPDM and CPE types to resist against salts soluble in water, moisture and acid or alkaline water.
Mechanical Seal: Using anti-abrasive seals (Silicon Carbide) with high quality to increase pump lifetime. To supply high quality and more reliable pumps and to increase the mechanical seals lifetime, SPICO has applied a special chamber full of oil between pump and electro motor which are sealed by using two mechanical seals and two oil seals which the oil can be controlled by an Allen screw no.8.
Porosity Impregnation: All casting parts have been alloyed by professional experts to avoid any pores or minute leaks in them. However, SPICO performs Porosity Impregnation process for main casting parts by using special machines and resin. So the electro motor penetrability to water reaches zero.
ID: All SPICO products have a serial no., engraved on pump casing, which is known as their identification no. This number specifies the production file and the technical ID of each pump which are kept in Company filing system.
Guarantee: All SPICO products, according to attached warranty terms, are guaranteed for SIX MONTHS upon purchase date. Using high protective systems for pumps are recommended.
|
|
SI-25-3 Impeller |
|
|
Read more...
|
SI-25-1
FOR DIRTY WATER (CONTAINING ABRASIVE MATERIALS)
|
|
Application:
Agriculture, sewage engineering, transmission companies, municipalities, metro co., civil engineering, dam and road construction companies, excavation companies and for other domestic and industrial purposes.
Technical Characteristics:
SI-25-1 pump is in two models: single phase with 220V and three phases with 380 V has been designed and manufactured.
Parts: Cylinder block of Electromotor is made of special alloyed aluminum, the impeller, the cap and pump casing are made of Ductile cast iron, the shaft & all screws are made of stainless steel which multiply the resistance to corrosion.
Impeller: By using vortex impeller in this model, this pump can be used for transferring muddy waters containing sand and abrasive particles, surplus rain and flood water, stream and river water, to irrigate the farms and to evacuate the pits filled by waste water.
Paint: All cast iron parts are covered by a special paint of Epoxy(the paint used in coating Ships’ hulks) which creates a good resistance to oxidation. After final manufacturing and testing of all parts made of aluminum and before painting them, they are degreased in specific small pools and then acid dipping to get high resistance against the salts soluble in water.
Cable: Use of special cable of EPDM and CPE types to resist against salts soluble in water, moisture and acid or alkaline water.
Mechanical Seal: Using anti-abrasive seals (Silicon Carbide) with high quality to increase pump lifetime. To supply high quality and more reliable pumps and to increase the mechanical seals lifetime, SPICO has applied a special chamber full of oil between pump and electro motor which are sealed by using two mechanical seals and two oil seals which the oil can be controlled by an Allen screw no.8.
Porosity Impregnation: All casting parts have been alloyed by professional experts to avoid any pores or minute leaks in them. However, SPICO performs Porosity Impregnation process for main casting parts by using special machines and resin. So the electro motor penetrability to water reaches zero.
ID: All SPICO products have a serial no., engraved on pump casing, which is known as their identification no. This number specifies the production file and the technical ID of each pump which are kept in Company filing system.
Guarantee: All SPICO products, according to attached warranty terms, are guaranteed for SIX MONTHS upon purchase date. Using high protective systems for pumps are recommended.
|
|
SI-25-1 Impeller |
|
|
Read more...
|
|
Sewage Pumps 2"
| 
| 
